USB Drive Letter Manager 5.6.0 + x64 + Portable

Bugfix: On AutoRun of CMD and BAT files (e.g. open="C:\Batch\test.cmd") no params passed since V4.8.8.0
Bugfix: Holding the Shift key pressed to skip AutoRuns did not work since Vista; "Solution": Force=1 is default now under Vista+ (Shift key ignored) and USBDLM_usr.exe is asked for the Shift key state if Force=0 is set for an open line
Bugfix: UsbDriveInfo x64 showed several debug information not intended for end users
Bugfix: Balloontip text for multiple partitions was used even there is only one partition with a volume
New: Keep Alive for drives

Bugfix: In some situations autoruns wasn't executed and balloon tips not shown

Bugfix: Crash on very long volume kernel names

Bugfix: Handling of potential "BadUSB" devices did not work unter Vista+ unless a [OnDeviceArrival] section is present
Bugfix: Since V4.6 letters in [NetworkLetters] did not overrule letters in [DriveLetters] sections (as documented)

Bugfix: Since V4.8.8.0 the logfile was always written to C:\_USBDLM.LOG
Bugfix: UsbDriveInfo did not read USBDLM.INI changes on refresh

Bugfix: Since V4.5.9 OnUserLogon section executed for the first user only logged on at the same time
Bugfix: Since V4.8.7 on arrival of a drive the drive letter was removed for a short moment even is was not required
Bugfix: Since V4.8.7 newly attached volumes not handled correctly if the was other volume with an identical device ID attached before
Bugfix: Since V4.8.7 the USB port criteria was not reliable
Bugfix: When registering as Windows service by means of the Windows API function CreateService USBDLM passed the path to the USBDLM.exe in the parameter lpBinaryPathName unquoted even it contains spaces. Despite the name of the parameter the Service Control Manager resolves it as a command line, thus with C:\Program Files\USBDLM\USBDLM.exe it would execute an existing C:\Program.exe with system previleges. The MSI did it right. USBDLM corrects the path without a reinstall.
New: Setting SafeCommandLines to reject ambiguous open= command lines
New: UsbDriveInfo warns for command lines which contain spaces but the executable not quoted
New: "BadUSB" blocking: On arrival of an USB keyboard or network device USBDLM can ask the user if this is ok

Bugfix: Since V4.8.7 the USB port criteria was not reliable
New: "BadUSB" blocking: On arrival of an USB keyboard or network device USBDLM can ask the user if this is ok

Bugfix: Since V4.8.7 on arrival of a drive the
drive letter was removed for a short moment even is was not required

Bugfix: Since V4.5.9 OnUserLogon section executed for the first user only logged on at the same time
New: UsbDriveInfo warns for command lines which contain spaces but the executable not quoted

Bugfix: Since V4.8.0 crash USBDLM on logout when a virtual volume (Subst, Network or TrueCrypt drive) is present and on some other occasions
New: UsbDriveInfo keeps device which are prepared for safe removal in the list
New: UsbDriveInfo detect media changes by means of Windows notification messages instead of polling once a second
New: Under Windows 7 and higher UsbDriveInfo can attach and detach VHDs, under XP and Vista if VHDmount from Microsoft Virtual Server 2005 is installed in its default folder, thus the vhdmount.dll is found in %ProgramFiles%\Microsoft Virtual Server\Vhdmount

Bugfix: Since V4.8.0 crash USBDLM on logout when a virtual volume (Subst, Network or TrueCrypt drive) is present
New: UsbDriveInfo detect media changes by means of Windows notification messages instead of polling once a second

New: UsbDriveInfo keeps device which are prepared for safe removal in the list
New: Under Windows 7 and higher UsbDriveInfo can attach and detach VHDs, under XP and Vista if VHDmount from Microsoft Virtual Server 2005 is installed in its default folder, thus the vhdmount.dll is found in %ProgramFiles%\Microsoft Virtual Server\Vhdmount

Bugfix: Empty treeviews in UsbTreeView on some computers

Bugfix: Several causes for crashes since V4.8.0 fixed
New: Delay with some drives removed

Bugfix: Several causes for crashes since V4.8.0 fixed
New: USBDLM variable %DateISO%, e.g. 2014-04-14
New: USBDLM tries on arrival of a disk device to give the mount manager data for the volume. This prevents Windows from assigning a drive letter which USBDLM then has to change. Since Windows 8 this does not work because it assigns the drive letter too fast. At least USBDLM can remove a wrong letter earlier and assing the right one later as usual
New: VolumeSize, VolumeSerial and DeviceType TrueCrypt are determined by means of the partition information instead of the volume information -> prevents delays sometimes
New: On arrival the volumes are no more accessed unless required to gather information to test for defined criteria; Results sometimes in faster arrivals
New: UsbDriveInfo commandline params -rv -rd -rb to save a report of view Volumes, Drives or BusTypes (upper case R writes Unicode file, lower case Ansi)
Bugfix: UsbDriveInfo reports was cut at 32KB
Bugfix: Since V4.7.3 UsbDriveInfo crashed if USBDLM is installed on a non-NTFS formatted drive
New: UsbDriveInfo can change drive letters when started with admin previleges

Bugfix: UsbDriveInfo reports was cut at 32KB
New: UsbDriveInfo commandline params -rv -rd -rb to safe a report of view Volumes, Drives or BusTypes (upper case R writes Unicode file, lower case Ansi)
New: USBDLM variable %DateISO%, e.g. 2014-04-14

Bugfix: Several causes for crashes fixed
New: USBDLM tries on arrival of a disk device to give the mount manager data for the volume. This prevents Windows from assigning a drive letter which USBDLM then has to change. Does not work for removable drives under XP because it is unknown how Windows builds the device ID of such volumes (something like STORAGE\REMOVABLEMEDIA\8&2CF9DF81&0&RM)

Bugfix: Since V4.8.2 USBDLM Friendly Names did not work as DeviceID criteria
Bugfix: UsbDriveInfo did not show network drives in the BusTypes view

Bugfix: Since V4.8.0 USBDLM might crash with NoMediaNoLetter>0
New: UsbDriveInfo with BusTypes view

Bugfix: Since V4.8.0 USBDLM crashed on arrival of a drive which does not repond within 2 seconds
Bugfix: Crash UsbDriveInfo if started without a USBDLM.INI
Bugfix: Command interface returned errors on success

Bugfix: Since V4.8 crash after many arrivals+removals of a drive
Bugfix: Using the command interface could cause CPU load and massive logging
Bugfix: OnServiceStart did not work
Bugfix: Since V4.8 UsbDriveInfo might show wrong INI sections

Хренотень ! Один раз показала на рабочем столе флешку после вставки в комп и исчезла в небытие куда то АЛИС !

Bugfix: Checking drive letters on startup of the USBDLM service did not work for non-USB drives if the drive's BusType was not obvious, e.g. a SATA drive with a DeviceID SCSI\...
Bugfix: AutoRun MD5 check did not work after V4.2.1
Bugfix: Drives configured in [IgnoreDevices] got the drive letter assigned by Windows removed
Bugfix: Ignoring the Apple iPod did not work
New: Events [OnDiskArrival], [OnDiskRemovalRequest], [OnDiskRemoval] for disks, e.g. without partitions or with unknown partitions
New: Command interface for restricted users to flush the file cache, dismount, safely remove hardware, etc
New: UsbDrivesInfo output rearranged and extended
New: UsbDriveInfo shows criteria good for Copy&Paste to the USBDLM.INI (Options -> Show USBDLM criteria)
New: UsbDriveInfo resolves the container of TrueCrypt volumes and can "eject" them
Removed: Support of Windows 2000

Bugfix (again): Crash on some computers