HandBrake 1.6.1 + x64 + Portable

Before updating HandBrake, please make sure there are no pending encodes in the queue, and be sure to make a backup of any custom presets and app preferences you have, as they may not be compatible with newer versions.

Windows users, please make sure to install Microsoft .NET Desktop Runtime version 6.0.x. Read carefully: you need the DESKTOP runtime. You must install .NET 6 even if you have installed .NET 7.

HandBrake 1.6.1
All platforms
Video
Fixed a potential decoder issue that could cause desync with audio (#4788, #4789)
Command line interface
Fixed inability to name external subtitles tracks using --subname
Mac
Fixed behavior of quality slider when changing encoders
Linux
Fixed translations missing updates as part of 1.6.0 (#4790)
Bulgarian (Български)
Corsican (Corsu)
Dutch (Nederlands)
German (Deutsch)
Spanish (Espa?ol)
Fixed (partially) Intel QSV hardware detection (#4768)
Fixed a potential crash when canceling an Intel QSV encode (#4341)
Fixed building with -Werror=format-security by adding missing format strings where needed
Windows
Fixed quality slider not allowing negative values for encoders supporting them
Fixed issues upgrading presets from older versions (#4820)
Fixed a potential graphical interface hang when stopping the queue (#4782)
Fixed optical disc drives on the source selection pane not scanning correctly (#4771)
Fixed erroneous display of 2-pass check box for Intel QSV AV1 encoder (not yet supported) (#4777)
Fixed a build configuration issue that broke version 1.6.0 for Windows on arm64
Fixed an issue that prevented NVDEC from being available
Fixed passthru audio erroneously falling back to encoding (#4795)
Fixed the Save New Preset button incorrectly overwriting recently added presets (#4804)

В настройках программы есть вкладка "Расширенные" в ней "Настройка x264/5"
"Постоянное качество дробной зернистости"
народ... подскажите пожалуйста... кто знает... какое значение устанавливать..???
1.00 / 0.50 / 0.25
по умолчанию установлено - 0.50
может кто в теме и знает... на что это влияет...

All platforms
General
Added AV1 video encoding
Added high bit depth and color depth support to various encoders and filters
Added 4K AV1 General, QSV (Hardware), and MKV (Matroska) presets
Added 4K HEVC General presets and updated related presets to use similar encoder settings
Revised Web presets and renamed to Creator, Email, and Social
Removed VP8 presets
The VP8 video encoder is now deprecated and will be removed in a future release
Related, the Theora encoder is long deprecated and will be removed in a future release
Miscellaneous other preset revisions
Video
Added SVT-AV1 (software) and Intel QSV AV1 (hardware) video encoders
Added VP9 10-bit encoder
Added NVENC HEVC 10-bit encoder
Added VCN HEVC 10-bit encoder
Added H.264 levels 6, 6.1, and 6.2 for the x264 encoder
Added H.264/H.265 4:2:2 and 4:4:4 profiles for the x264 and x265 encoders
Added H.265 4:2:2 profile for VideoToolbox encoder on Apple Silicon
Added support for Intel Deep Link Hyper Encode (leverage multiple QSV media engines to increase performance)
Fixed longstanding issue where slowest NVENC encoder preset caused encoding failures
Removed support for Intel CPUs older than 6th generation (Skylake) when using Intel Quick Sync Video
Filters
Added Bwdif deinterlace filter
Improved Autocrop filter algorithm
Higher accuracy on mixed aspect ratio content, e.g. both letterbox and full frame pictures
Improved video scaling performance on Apple Silicon and ARM-based systems
Use zscale (zimg) by default, falling back to swscale where necessary
Improved multithread performance (slightly) for the following filters on high core count systems
Comb Detect
Decomb
Denoise
NLMeans
Updated the following filters to support higher than 8-bit content and 4:2:2/4:4:4 chroma subsampling
Detelecine
Comb Detect
Decomb
Grayscale
Denoise
NLMeans
HQDN3D
Chroma Smooth
Sharpen
UnSharp
LapSharp
Build system
Added support for building for OpenBSD
Added --cpu configure parameter to enable building for native CPU architecture
Added --lto configure parameter to enable link time optimization
Miscellaneous bug fixes and improvements
Third-party libraries
Updated libraries
AMF 1.4.24 (AMD VCN encoding)
FFmpeg 5.1.2 (decoding and filters)
FreeType 2.12.1 (subtitles)
Fribidi 1.0.12 (subtitles)
HarfBuzz 4.4.1 (subtitles)
libass 0.16.0 (subtitles)
libbluray 1.3.4 (Blu-ray decoding)
libdav1d 1.0.0 (AV1 decoding)
libdvdread 6.1.3 (DVD decoding)
liblzma (xz) 5.2.6 (LZMA video decoding, e.g. TIFF)
libjpeg-turbo 2.1.4 (preview image compression)
libspeex 1.2.1 (Speex audio decoding)
libvpx 1.12.0 (VP8/VP9 video encoding)
libxml 2.10.3 (general)
oneVPL 2023.1.0 (Intel QSV encoding/decoding)
x264 164 r3100 (H.264/AVC video encoding)
x265 r12747 (H.265/HEVC video encoding)
zimg 3.0.4 (color conversion)
New libraries
SVT-AV1 1.4.1 (AV1 encoding)
Linux
Added many quality of life improvements contributed by community members
Improved parity with the Mac and Windows graphical interfaces
Miscellaneous bug fixes and improvements
Updated translations
Added new translations
Bulgarian (Български)
Finnish (Suomi)
Georgian (???????)
Mac
Added Quick Look support to the queue
Miscellaneous bug fixes and improvements
Updated translations
Added Japanese translation
Windows
Miscellaneous bug fixes and improvements
Updated all translations
Added new translations
Bulgarian (Български)
Dutch (Nederlands)
Polish (Polski)

All platforms
General
Fixed a crash when using "Align AV" on Intel based systems. (#3683)
Fixed a crash when reading certain DVD's with missing VOB files
Hardware Encoding
Fixed an issue with QuickSync accelerated Crop/Scale generating incorrect aspect ratios (#3236)
Fixed a crash after a subtitle scan when using the QuickSync encoder. (#3741)
Subtitles
Backport some libass patches which should correct some issues with font and font-weight selections. (#3736)
Fixed an issue that could prevent 3rd party software handling HandBrake files with dvb subtitles.
Command line interface
Fixed a regression that prevented upscaling when using -w and -h (#3746)
Linux
Added: flatpak permission to show bookmarks in file dialogs (#3748)
Mac
Fix an issue where the Quality Slider was being ignored when using the VideoToolbox encoder. (#3751)
Fixed an issue where incompatible hardware presets could be selected.
Windows
Windows UI builds are now available for ARM64 devices. (Named arm64 or aarch64 in the download section)
Added upgrade notices to the installer welcome page advising of .NET Desktop Runtime 5 requirements and to complete existing queue. (#3693)
Added support for software rendering which can be enabled to workaround issues with Variable Refresh Rate and 3rd party software causing rendering corruption (#3755)
Added a new preference to define how the preset toolbar button renders the preset list. (#3697)
Fixed a crash which would prevent all user settings from loading in some circumstances.
Fixed "Reset Settings" button in preferences. Certain settings were not reset correctly. (#3726)
Fixed issues with the built-in updater that may cause it to fail to run the installer if the app was not running as admin.
Fixed an issue that required and app restart to apply changes to the max simultaneous encodes setting.
Fixed an issue with Audio Defaults fallback encoder quality/bitrate/mixdown settings would not display correct values (#3739)
Fixed an with QSV multi-instance support where multiple Intel GPU's are used.

All platforms
Video
Fixed an issue on older Intel CPUs causing the CLI to fail to initialize (#3924)
Updated video engine to preserve chroma sample location information
Updated Intel Quick Sync to use the Intel oneAPI Video Processing Library (oneVPL)
Audio
Fixed MP2 audio sources not utilizing the fallback encoder when pass through is disabled (#3863)
Fixed FFmpeg AAC audio encoder quality mode scale range (#1295)
Subtitles
Fixed an issue with captions pass through durations (#3764)
Build system
Fixed multiple potential race conditions in Flatpak build process
Updated mac-toolchain-build script with newer tool versions
Third-party libraries
Updated libraries
FFmpeg 4.4.1 (decoding and filters)
FreeType 2.11.1 (subtitles)
Fribidi 1.0.11 (subtitles)
HarfBuzz 3.1.2 (subtitles)
Jansson 2.14 (JSON architecture)
libass 0.15.2 (subtitles)
libdav1d 0.9.2 (AV1 decoding)
libjpeg-turbo 2.1.2 (preview image compression)
libogg 1.3.5 (Xiph codecs support)
libvpx 1.11.0 (VP8/VP9 video encoding)
zimg 3.0.3 (color conversion)
Linux
Fixed a filter settings issue that resulted in incorrect filters being added to jobs (#3910)
Updated Intel QSV Flatpak plugin to use Intel MediaSDK 21.3.5
Updated Flatpak dependencies
Freedesktop Platform 21.08
GNOME 41
Added Corsican (Corsu) translation
Updated translations
Simplified Chinese (????)
Dutch (Nederlands)
French (Fran?ais)
Korean (???)
Spanish (Espa?ol)
Swedish (Svenska)
Miscellaneous bug fixes and improvements
Mac
Requires macOS 10.13 High Sierra or later
Fixed potential issues where encoding process could get stuck on efficiency cores in some cases
Fixed an issue with automatic naming not applying correctly
Fixed main window not being shown upon editing a job in the queue
Updated queue statistics tab to include average encoding speed and percent of original file size
Added "Move to top" and "Move to bottom" to the queue context menu
Added a stop breakpoint to the queue, set when stop after job is selected and may be reordered (#2572)
Added native support for the VideoToolbox API, enabling advanced features such as frame multi-pass, mastering display and content light metadata, and chroma location; the previous implementation via FFmpeg's libavcodec has been removed
Added Corsican (Corsu) translation
Updated translations
Simplified Chinese (????)
French (Fran?ais)
German (Deutsch)
Italian (Italiano)
Portuguese (Portugu?s)
Miscellaneous bug fixes and improvements
Windows
Requires Windows 10 or later and Microsoft .NET Desktop Runtime 6.0.0 or later
Fixed a potential crash when encoding using Intel QSV in 2-pass mode (#4026)
Fixed potential issues where encoding process could get stuck on efficiency cores in some cases
Fixed an issue with static preview not updating when switching between automatic and custom cropping modes (#3911)
Updated the toolbar preset dropdown to an overlay panel that utilizes a tree view which saves state
Updated UI with various improvements to layout, typography, and cosmetics
Updated queue statistics tab to include average encoding speed and content information
Updated automatic naming file format placeholders to be live options
Updated Send File To preference to set HB_SOURCE, HB_DESTINATION, and HB_EXIT_CODE environment variables, which can be used instead of arguments
Added new exit_code parameter to Send File To preference
Added "Move to top" and "Move to bottom" to the queue context menu
Added a stop breakpoint to the queue, set when stop after job is selected and may be reordered (#2572)
Added support for Windows 10/11 notifications, enable in Preferences > When Done
Added support for Right to Left UI rendering for languages that require it. This can be set in preferences
Added Traditional Chinese (????) translation
Updated translations
Simplified Chinese (????) - includes fix for access keys in menus
Corsican (Corsu)
German (Deutsch)
Italian (Italiano)
Japanese (???)
Miscellaneous bug fixes and improvements

All platforms
General
The HandBrake engine is now 10 and 12bit capable. Please note that not all filters support 10 and 12 bits. Using an 8bit filter will cause the pipeline to run at 8bit. Please see the documentation for more information.
HDR10 metadata will be passed through from the source file if present.
Static Previews that are generated during file scans are now stored in compressed jpeg format (previously stored as YUV420). Temporary disk space usage and disk writes are massively reduced. This uses libjpeg-turbo
Filters
New Filter: Chroma Smooth
New Filter: Colourspace Selection.
New Filter: Support for QuickSync hardware accelerated Crop/Scale when using full path.
Hardware Encoding
New Encoder: Media Foundation
For Windows based ARM64 devices powered by Qualcomm Chipsets.
Updates to the AMD VCN encoder:
Quality tuning for VCN's constrained vbr rate control mode. Results are the same or better than cqp mode, and bit rate is much more predictable.
Included optimised H265 presets for 1080p and 4K content.
Updates to the Intel QuickSync encoder:
Minor performance improvement by skipping VFR and Crop/Scale filters when they are not required.
Overhauled memory management including improved zero-copy support where software filters are not used which should also improve performance.
Audio
MP2 Audio Passthru support.
Subtitles
New General purpose subtitle decoder
Added support for DVB Subtitles (Passthru and Burn-In)
Added support for EIA608 Closed Captions.
Replaced current decoders for PGS, SRT and SSA with those in ffmpeg. This should correct a number of rendering issues on Burn-In
Reduced default CC burn-in font-size.
Third-party libraries
The following 3rd party libraries have changed:
ffmpeg 4.4
AMF 1.4.18 (AMD VCN encoding)
nv-codec-headers 11.0.10.1 (Nvidia NVENC encoding)
libmfx 1.34
freetype 2.10.4
fribidi 1.0.10
harfbuzz 2.8.1
jansson 2.13.1
libass 0.15.1
libbluray 1.3.0
libdvdnav 6.1.1
libdvdread 6.1.1
dav1d 0.9.0
libvorbis 1.3.7
libvpx 1.10.0
x264 161 r3043
x265 3.5
zimg and libjpeg-turbo are new dependencies.
General UI Updates (Applies to Windows, macOS and Linux)
The "Dimensions" tab has been redesigned.
The Rotate and Flip filter has been moved from the filters tab.
Added support for padding
Added support to control the resolution limit.
Added limited support for upscaling
Linux
Minor usability tweaks and fixes.
Updated translations (levels of completeness vary)
Mac
Support for Apple Silicon (macOS only)
Support for running multiple simultaneous jobs.
Support eyetv packages with .ts enclosed media file
Improved UI navigation
Added two menu items to quickly switch between titles
Improved undo/redo support
Drag & drop import/export support in the presets popover
Preference Updates:
Added a preference to control whether the current edited preset should be re-applied when changing title
Improved Security Scoped Bookmarks management
Minor improvements and fixes for macOS 11
Updated Sparkle Updater library.
Updated translations (levels of completeness vary)
Windows
Please note, the Windows UI now requires "Microsoft .NET 5 Desktop Runtime"
Windows 10 is now the minimum version supported. The app will still run on Windows 7 and 8.1 however you will receive a message noting that it is not supported (twice) after which it will continue to run. Please note some functionality may not work correctly on these older operating systems and no support will be provided.
Process Isolation
When enabled, any encodes that are started are run under a separate "handbrake.worker.exe" process.
This protects the main UI from any crashes that could occur whilst processing a file and allows the queue to continue.
Multiple jobs can be run simultaneously to improve CPU utilisation on high core count systems.
Audio Tab
Minor improvement to the usability of auto-passthru. To prevent confusion, the "auto-passhtru" audio "encoder" option is now only available on the defaults screen and not the main audio tab.
Queue Improvements
Restored lost "Stop" functionality in the new queue design that landed in 1.3.
Presets
The legacy preset side panel has been removed. The presets button on the toolbar will now offer a "preset manager" and list the available for selection.
The inline-preset view from 1.3 is now permanent.
Installer Improvements
Existing NSIS installer: Option to create a shortcut for "all users" as the last step.
Preference Updates:
New Auto Name option: Always use the default path for each new source / title selected
"Send File To" Arguments now supports "{source}" and "{destination}" replacement placeholders.
Added a preference to configure the "Pause on Low Battery" feature.
Check for Updates is now "opt-in" for new installs.
UI Performance: Optimisations to allow better performance when handling large sets of files (1000+)
Updated translations (levels of completeness vary)
Miscellaneous bug fixes and improvements

прога даст фору

...что значит "без потерь"? без потерь - это блюрэй тока )

General

• Fixed ISO 639-2/B language codes not set correctly in MKV (affects Hebrew, Indonesian, Javanese, and Yiddish) (#2903)
• Improved support for sources where pixel format cannot be quickly identified, e.g. due to delayed video track start (#2893)
• Added logging to identify where hardware support is disabled
• Miscellaneous bug fixes and improvements

Video

• Improved Intel QSV memory footprint by eliminating a buffer pool (#2675)
• Improved Intel QSV H.265 memory buffer size as required by newer Intel Media SDK (#2862)
• Fixed and improved Intel QSV in various situations, especially hardware decoding (#873, #2660, #2661, #2829)
• Fixed full range video being not being identified as limited range after conversion where filters are used (#2859)

Subtitles

• Fixed handling of overlapping SSA import subtitles (791adba)
• Improved support for out-of-order SSA subtitles as allowed by specification (#2906)

Command line interface

• Fixed --preset failure unless full path is specified, e.g. --preset="Category Name/Preset Name" (#2838)

Build system

• Improved Flatpak to better conform to freedesktop metainfo standards
• Improved Intel QSV Flatpak plugin build effiency using cmake-ninja
• Added a patch to fix cross compiling libdav1d using GCC 10.x (quality of life improvement)
  • Official HandBrake 1.3.3 Windows release is built using GCC 9.x and is not directly affected by this issue

Third-party libraries

• Updated libraries
  • FFmpeg 4.2.3 (decoding and filters)

Mac

• Fixed preview layout not displaying properly on OS X 10.11 El Capitan
• Fixed incorrect copyright year on About dialog (#2830)

Windows

• Fixed a crash related to the dark theme (#2816)
• Fixed a potential crash related to preview image memory allocation (#2871)
• Fixed a potential crash due to certain actions causing no preset being selected (#2875)
• Fixed missing E-AC-3 encoder option (#2855)
• Fixed hardware encoder support unavailable in portable build (#2832)
• Miscellaneous bug fixes and improvements

Assets28
HandBrake-1.3.3-source.tar.bz216 MB
HandBrake-1.3.3-source.tar.bz2.sig566 Bytes
HandBrake-1.3.3-x86_64-Win_GUI.exe12.9 MB
HandBrake-1.3.3-x86_64-Win_GUI.exe.sig566 Bytes
HandBrake-1.3.3-x86_64-Win_GUI.SafeMode.exe12.8 MB
HandBrake-1.3.3-x86_64-Win_GUI.SafeMode.exe.sig566 Bytes
HandBrake-1.3.3-x86_64-Win_GUI.SafeMode.zip17.2 MB
HandBrake-1.3.3-x86_64-Win_GUI.SafeMode.zip.sig566 Bytes
HandBrake-1.3.3-x86_64-Win_GUI.zip17.3 MB
HandBrake-1.3.3-x86_64-Win_GUI.zip.sig566 Bytes
HandBrake-1.3.3-x86_64.flatpak22.4 MB
HandBrake-1.3.3-x86_64.flatpak.sig566 Bytes
HandBrake-1.3.3.dmg20.2 MB
HandBrake-1.3.3.dmg.sig566 Bytes
HandBrakeCLI-1.3.3-win-x86_64.SafeMode.zip15.9 MB
HandBrakeCLI-1.3.3-win-x86_64.SafeMode.zip.sig566 Bytes
HandBrakeCLI-1.3.3-win-x86_64.zip16 MB
HandBrakeCLI-1.3.3-win-x86_64.zip.sig566 Bytes
HandBrakeCLI-1.3.3-x86_64.flatpak8.96 MB
HandBrakeCLI-1.3.3-x86_64.flatpak.sig566 Bytes
HandBrakeCLI-1.3.3.dmg17 MB
HandBrakeCLI-1.3.3.dmg.sig566 Bytes
LibHB-1.3.3-win-x86_64.zip16.4 MB
LibHB-1.3.3-win-x86_64.zip.sig566 Bytes
Plugin.HandBrake.IntelMediaSDK-1.3.3-x86_64.flatpak51.1 MB
Plugin.HandBrake.IntelMediaSDK-1.3.3-x86_64.flatpak.sig566 Bytes
Source code(zip)
Source code(tar.gz)

• © 2020 GitHub, Inc.
• Terms
• Privacy
• Security
• Status
• Help
• Contact GitHub
• Pricing
• API
• Training
• Blog
• About

All platforms
General
Fixed point to point end detection in certain scenarios (#2603)
Improved support for H.265 video in AVI container produced by some security cameras (#2622)
Added logging to identify problematic sources where container and video track pixel aspect ratios differ
Added logging to help debug potential JSON API issues
Video
Fixed color range conversion being applied twice when scaling video (#2561)
Fixed incorrect identification of support for QSV HEVC encoder on older Intel hardware (#2558)
Added logging to identify automatic picture rotation
Miscellaneous bug fixes and improvements
Audio
Fixed an upstream FFmpeg issue where passing through AAC ADTS audio could produce invalid MKV output in rare cases (error instead) (#2809)
Filters
Fixed uninitialized memory in NLMeans prefilter leading to video corruption at bottom of picture (only affects custom settings) (#2576)
Fixed a crash in the Detelecine filter with out of bounds parameters (only affects custom settings) (#2560, #2804)
Subtitles
Fixed burned in subtitles position offset where cropscale filter is not used (#2449)
Command line interface
Fixed subtitles not being selected when specifying --all-subtitles without also specifying a non-empty --subtitle-lang-list
Build system
Fixed building the GTK graphical interface for use on Windows (link ole32)
Updated Flatpak manifest creation script for compatibility with Python 3
Updated Flatpak runtime and numactl library versions, QSV plugin
Improved minimum version dependencies to facilitate building on systems with older automake and pkg-config
Added a workaround for an upstream libdav1d issue affecting installation on FreeBSD (#2662)
Miscellaneous bug fixes and improvements
Linux
Fixed point to point controls not accepting fractional seconds
Fixed updating presets with identical names in different categories
Improved parity with other platforms by allowing removal of preset categories (automatic after last preset in category is removed)
Improved parity with other platforms by showing title and chapter range on the queue summary tab
Mac
Fixed selection behavior new track audio mixdown set to DPL2 instead of stereo (#2641)
Fixed queued job failures related to removable drives by resolving security scoped resources as needed (#2566)
Windows
Fixed loading preset files with Unicode characters in path (#2427)
Fixed clear queue options to prevent them clearing active jobs (#2587)
Fixed main window status label not always reflecting the true count of queue jobs (#2538)
Fixed failure loading default settings which could cause various issues in the graphical interface (#2549)
Fixed preview images displaying incorrectly in some cases (anamorphic none, flip horizontal) (e9675bb, #2764)
Fixed various issues related to Auto Passthru, including fallback settings (#2619, #2627, #2611)
Fixed exported presets not importing correctly using the Mac graphical interface (#2531)
Fixed pause and resume not working correctly in some cases (#2647)
Fixed display of times greater than 24 hours (estimated time renaming, paused duration) (#2582, #2649)
Fixed various cosmetic issues in the graphical interface (#2645, #2646)
Improved display of long filenames in the queue (#2570)
Improved some UX stress cases related to the queue (#2632)
Improved error message when importing a preset specifying a nonexistent audio encoder (#2638)
Improved audio and subtitle languages behavior to preserve selected languages order where "any" is also selected (#2611)
Improved low disk space preferences and alerts (#2648)
Added a workaround for an upstream .NET issue causing tooltips to not render correctly in some cases (#2630)
Miscellaneous bug fixes and improvements

ребята , скажите вообще стоит это прога внимания? ищу прогу для сжатия без потерь. посоветуйте пожалуйста

Поправьте в описаниии, плз: Русский язык - ЕСТЬ!