Autodesk NetFabb Ultimate 2023 R1

Additional notesSimulation Utility

• Importing STL files into Simulation Utility on a Windows 7 Remote Desktop produces a crash. As a workaround, you can launch Simulation Utility from a command line with the following command: tscon 1 /dest:console start "appname.exe modelfile.stl" where modelfile.stl is the name of the file to be imported. If this does not work, a more extensive procedure is as follows:
  Determine your remote desktop session ID
  1. At the Command prompt, type query session and press Enter.
  2. Find the ID number in the rdp-tcp row (typically 1 or 2).
• Create and run a batch file
  1. In a text editor, create a two-line batch file (.bat) with the correct Session ID, Netfabb install directory, and STL file path. These elements are located as shown below:tscon <session ID> /dest:console
     start "" "<Netfabb install directory>\SIM\appbase.exe" "<STL file path>" ""
     
     An example is as follows:
     tscon 1 /dest:console
     start "" "C:\Program Files\Autodesk\Netfabb Ultimate 2020\SIM\appbase.exe" "c:\test\1.stl" ""
  2. Run the batch file as an administrator.Note: The batch file will end by logging you out of the remote desktop connection. Log back in to see the imported STL file in Simulation Utility.
• Simulation Utility does not work if Netfabb is installed in a folder whose name contains international characters.
• When working with a part that contains "model" in the name, Simulation Utility will crash when you perform a mesh preview or a solve. The error is caused because Simulation Utility incorrectly writes multiple STL files to the *STLF keyword. As a workaround, rename the part so that it does not contain the text "model".
• Warning and error notifications are cleared from the list of toast notifications when a simulation is re-run.
• If a part level powder bed or DED model is run while a PRM generation process is in progress, critical warnings and error notifications for the PRM process are not shown. Warnings and errors for a PRM generation are available from the View Logs button within the Job Manager.
• The Clipping Edit function is not available after using the Results Probe on a clipped surface. To edit the clipping plane, turn the clipping function off and then turn it back on again, selecting the desired new clipping surface.
• If a .TIVUS file using a custom PRM file is shared, moved, or copied to a new workstation, then the PRM file will revert to the first PRM file in the Machine Dialog menu. Import the custom PRM using the Processing Parameters Import function to add it to the local library and then reselect the file from the Machine Dialog.
• If multiple PRM files are generated simultaneously, the Lack of Fusion, Hot Spot, and Interlayer temperature columns in the Processing Parameters Library can remain blank until the Simulation Utility is closed and restarted.
• Selected points from the Results Probe will be lost once the user exports a CSV file.
• Some .SLDPRT files will not import the first time. If the user re-attempts the import it will work correctly.
• The new splashscreen that appears upon opening Simulation Utility may not be fully visible on smaller screens at some resolutions.
• PRM files created for Lack of Fusion and Hotspot only analysis will be erroneously labeled as "failed", even though they completed successfully. To overcome this issue, manually import the files into the PRM library.

Архив повреждён :(

New Menu Style:
-Access violation when hitting F2 to rename a part while the new menu style is active
-Shield Labeling and List Labeling swapped with respect to their buttons in the new menu
-Keyboard shortcuts assigned to the labeling modes are ignored while the new menu style is active
-Netfabb does not react to SpaceMouse® input anymore
-Clipping planes do not work properly while the new menu style is active and the clipping planes view -is detached from main window
-Access violation in rare circumstances after visiting Settings
-Minor icon, naming, and arrangement inconsistencies in menu structure

Machine workspaces:
-SLM 280 HL 1.0 has configurations missing
-Unable to save custom configuration for Xact Metal machines
-No configurations available for Xact Metal machines in Netfabb Premium
-Performing Z-compensation in Sisma workspaces removes support
-Rare glitches in W2P workspaces
-ExOne workspaces show various small issues
-Z value of build platform ignores buildplate thickness value

Lattice Commander:
-An issue causes Invalid type cast message
-The Trim role trims both mesh and lattice bodies instead of lattices only as intended

Miscellaneous:
-Netfabb can launch on screen space of disconnected monitor
-Cannot resize cutting plane by right-clicking and dragging the plane's nodes

Loading simulation results:
-Netfabb cannot read simulation results when write results frequency in Simulation Utility is set to greater than 1
-Simulation results in the support module are not updated when the unit system is switched

ATU:
-Inconsistent EBPA export results
-Fixed an issue with inconsistent export results in Netfabb when an EBPA is used which uses the ATU material-thickness calculation.

Invalid Iterators:
-Fixed invalid iterators in javascript when the corresponding list is cleared

Disappearing breakpoints
-Fixed unexpectedly disappearing breakpoints in editor

Invalid memory read access:
-Fixed memory access error

Wrong Encoding on file open:
-Fixed wrong character encoding when opening a file by clicking on a breakpoint in the breakpoint list
Wrong Encoding on file save
-Fixed wrong encoding when saving a file which is opened in an editor but not added to the current project

Breakpoint cannot be removedL
-Fixed an issue with breakpoints which cannot be removed at line 0