WPanorama 13.2.1

WPanorama.exe (build 1432):
During a panorama show, it is now possible to display a map showing the location from where the current panorama was shot (if available).
It is now possible to disable the screen saver while WPanorama is running. By default, the screen saver is disabled during the panorama show and when WPanorama is in full screen mode. It is also possible to set it so it is always disabled or only during the panorama show.
Adjusted some line spacings in the help in order to improve its look and readability.
All the controls (buttons, editors and menu items) allowing to set panorama related parameters are now disabled if no panorama is loaded.
From version 8.3.1, with some versions of Windows, if WPanorama was in full screen mode when the screen saver was triggered, going to windowed mode after the screen saver termination caused a "System error: code 5" popup to appear. It is not the case anymore since Windows 10 update of late January 2018.
From version 11.1.1, unlike all the other toolbar buttons, "Fit to desktop" was sometimes not greyed out during panorama loading. This has been fixed in this version.
When the global sound was not enabled, if a panorama associated with a music piece was discarded, when you clicked on the "Config. - Sound player" menu item, the item allowing to change the file name and the one allowing to discard it were still active. Now there is only the item allowing to specify a file name and it is greyed out.
WPanorama.scr (build 1235):
The "Image preview" checkbox now applies to all the image loading dialogs current panorama Select, logo Name and, in the "Image list" panel, the Add images function). In the previous versions, it only applied to the current panorama Select; for the logo Name the image preview was always enabled and for the Add images function it was never enabled.
If, when using the Add images function in the "Image list" panel, no images are loaded, the list doesn't refresh, which avoids a useless delay.
When using the Add images function in the "Image list" panel, if the number of selected files is too large (more than 3000, depending on the filenames length) no image is loaded and, in the previous versions, the "0 images added to the list" message was displayed for 1.5 seconds. From this version, in this case a more more explicit message is displayed, inviting the user to proceed to the loading in bits. This restriction is probably due to the operating system and may disappear in a future Windows update.
Adapted to the map display and the screen saver disabling in the panorama show.
Adjusted some line spacings in the help in order to improve its look and readability.
WPAInfo.exe (build 1195):
Now supports 4127 panoramas.
Corrected the coordinates of 5 panoramas, the description of 4 others, the author's name of 2 others and the author's website (added, removed or modified) of 91 others. The authors' websites removals or modifications have been done in order to get rid of dead links.

WPanorama.exe (build 1427):
  - Added a new feature allowing to specify global values for the map
    display parameters.
  - Improved help text for the "Virtual screen for multi-monitors..."
    and "Signal new version on startup" menu items.
  - When the "New version" popup appears at startup, if it shows the same
    value for "Local program version" and "Latest version on website", it is
    now possible to know what module (screen saver or WPAInfo) is of an older
    version by moving the mouse cursor over the indication of the local
    program version.
  - When downloading a new version from the "New version" popup, some info
    about the current version is sent to the site.
  - The parameters of the "Search for image" feature (Keyword, Whole word
    and Display order) are now memorized from one use to the next, even after
    restarting WPanorama.
  - Removed the hints on the <Enter> and <Esc> buttons in the "Capture
    multiple images" and "Make movie" panels.
  - The map display activation and deactivation is now simply done by a click
    on the "Config. - Advanced options - Location on the map enabled" menu
    item (there is no more submenu with several possibilities, as was the case
    in the previous versions since 10.2.1 beta).
  - When the "New version" popup is visible, the controls of WPanorama are now
    greyed out.
  - In the "New version" popup, it is now possible, thanks to a "What's new ?"
    button, to display the version history of the latest software (final or
    beta) available on the site.
  - A menu item, "Files - Update WPA info", allows to launch the WPAInfo.exe
    program which can update some information (description and geographic data)
    of the panoramas.
  - In the previous versions, when WPAInfo was launched from the help window
    it was always in the language of your version of Windows; it is now in the
    same language as the viewer.
  - Improved the debug menu for the developer.

  - In the "Config. - Advanced options - Exif coordinates..." dialog box,
    the controls allowing to modify the map default parameters are now
    disabled when "Exif coordinates enabled" is not checked.
    Corrected the tab order in this dialog box.
  - From version 11.0.1, if the "New version" popup appeared while WPanorama
    was in full screen mode, the mouse cursor was not displayed and it was not
    possible to click on the buttons. The only way to close this popup was to
    press <Alt><F4>. This problem has been corrected.
  - In the previous versions, in some of the dialog boxes in which the OK (V)
    and Cancel (X) buttons were present, the <Enter> and <Esc> keys had no
    effect. These keys are now active.
  - In the previous versions, on some computers the moving frame in the
    complete image display was sometimes flickering. It is not the case
    anymore. If the flicker is still present, make sure "Config. - Advanced
    options - Show position in complete image - Double buffering" is enabled.
  - The "Double buffering" menu item is now disabled if "Show position in
    complete image" is set to Off.

- Added a new feature allowing to specify global values for the map
display parameters.
- Improved help text for the "Virtual screen for multi-monitors..."
and "Signal new version on startup" menu items.
- When the "New version" popup appears at startup, if it shows the same
value for "Local program version" and "Latest version on website", it is
now possible to know what module (screensaver or WPAInfo) is of an older
version by moving the mouse cursor over the indication of the local
program version.
- When downloading a new version from the "New version" popup, some info
about the current version is sent to the site.

- In the "Config. - Advanced options - Exif coordinates..." dialog box,
the controls allowing to modify the map default parameters are now
disabled when "Exif coordinates enabled" is not checked.
Corrected the tab order in this dialog box.
- From version 11.0.1, if the "New version" popup appeared while WPanorama
was in full screen mode, the mouse cursor was not displayed and it was not
possible to click on the buttons. The only way to close this popup was to
press <Alt><F4>. This problem has been corrected.
- In the previous versions, in some of the dialog boxes in which the OK (V)
and Cancel (X) buttons were present, the <Enter> and <Esc> keys had no
effect. These keys are now active.

WPanorama.exe (build 1418):
- Added an option in the panorama show allowing to scroll the non 360° panoramas
in only one direction.
- At startup, WPanorama can check if a new version of the software is available
and, if it is the case, gives the possibility to connect to the site in order
to download it.
- The help panel is wider than in previous versions.
- Improved some of the help items.
- Improved the mouse cursor positioning when displaying various panels.
- The program can now deal with compatibility problems between Google Maps and
WPanorama by giving the possibility to automatically use the current web
browser to display the map if necessary.

- Corrected an issue in the panorama show because of which the "Show 360°"
option was in some cases not properly saved.
- In the previous versions, the panorama show parameters which didn't apply to
the screensaver were set to erroneous or default values when they were saved
from the screensaver configuration panel. Now they are set to default values
only if they were not already defined. Otherwise they keep their values.
- In the previous versions, for the 64 bits versions of Windows, the use of any
function of the "Screen saver" menu caused the current screensaver to be
disabled. This issue is now fixed.
- In the previous version, it was possible to maximize or minimize the network
parameters setting window. It is not the case anymore.
- Corrected a mixed text issue which occured in the help when the screensaver
was not present or of an incorrect version or when there was no history file.

WPanorama.scr (build 1226):
- Adapted to the panorama show changes.
- The help panel is wider than in previous versions.

WPAInfo.exe (build 1182):
- Now supports 3521 panoramas.
- It is now possible to stop the update before it is completed.

WPanorama.exe (build 1414):
- Added an option in the panorama show allowing to scroll the non 360° panoramas
in only one direction.

- Corrected an issue in the panorama show because of which the "Show 360°" option
was in some cases not properly saved.
- In the previous versions, the panorama show parameters which didn't apply to
the screensaver were set to erroneous or default values when they were saved
from the screensaver configuration panel. Now they are set to default values
only if they were not already defined. Otherwise they keep their values.

WPanorama.scr (build 1223):
- Adapted to the panorama show changes.

WPAInfo.exe (build 1179):
- Now supports 2724 panoramas.
- It is now possible to stop the update before it is completed.