Intel Solid-State Drive Toolbox 3.5.15

This release of the Intel® SSD Toolbox includes support for the Intel®
Optane™ Memory products. When using Intel® Optane™ Memory as a
system accelerator, expect an extra Volume tab in the SSD Toolbox due to
accelerator configuration. Also, several features are disabled in Toolbox
when system acceleration is configured. Support has also been added for
the Intel® Optane™ SSD DC P4800X Series, and the Intel® SSD DC P4600
and P4500 Series.
This release also includes firmware updates for the Intel® SSD DC S3520,
750 and Pro 5400s (80/120GB) Series products.
For the Intel® SSD DC S3520 Series, the latest firmware revision is
N2010112.
For the Intel® SSD 750 Series, the latest firmware revision is 8EV101H0.
The latest bootloader revision is 8B1B0133.
This firmware version contains fixes for the following issues:
• XN022 Assert Fixes
• Sequential read performance improvement at end of life from
firmware 8EV101F0
• Misc. sightings closure and improvement on product health.
For the Intel® SSD Pro 5400s (80/120GB), the latest firmware revision is
36P. For firmware fix details, please see release note from September 2016.

This release of the tool includes detection of the firmware update for the
Intel® SSD DC D3700, DC D3600, DC P3700, DC P3600, DC P3608, and DC
P3500 Series products. The latest firmware revision is 8DV101H0. The
latest bootloader revision is 8B1B0133.
Please use the Intel® SSD Data Center Tool should you wish to receive the
above mentioned firmware and bootloader updates.

This release includes a firmware update for the Intel® SSD 600p, Intel® SSD Pro 6000p, Intel® SSD E 6000p, Intel® SSD DC P3100, Intel® SSD DC S3610, and the Intel® SSD DC S3710 Series products. Users on Windows 7 or 8.1 must use the Intel® SSD Firmware Update Tool to receive the firmware update.

For the Intel® SSD 600p Series, the latest firmware revision is 109C.
For the Intel® SSD Pro 6000p Series, the latest firmware revision is 109P.
For the Intel® SSD E 6000p Series, the latest firmware revision is 109E.
For the Intel® SSD DC P3100 Series, the latest firmware revision is 109D.
For the Intel® SSD DC S3610 and Intel® SSD DC S3710 Series, the latest firmware revision in G2010160.

Немного некорректные скрины в теме, помогу - вот так выглядит окно программы при наличии SSD диска от Intel

This release of the Intel® SSD Toolbox includes support for the Intel® SSD E
5420s and support with the Windows 10* NVMe* driver for the Intel® SSD
600p, Pro 6000p, E 6000p and DC P3100 Series products.
This release has a fix to the behavior of status of Optimizer correcting a
“Never Run Before” issue.
This release requires Windows 7 with SP1 or newer as well as the install of
.NET 4.0 or greater on the system. The tool no longer supports Windows
XP* and Windows Vista*

This release of the Intel® SSD Toolbox includes a firmware and
bootloader update for the Intel® SSD 750 Series products. The latest
firmware version is 8EV101F0. The latest bootloader version is
8B1B0133.
This firmware version contains the following enhancements:
• Added NVME IO Queue Metrics log page support
• Added Secure Erase Command Monitoring log page support
• Updated Secure Erase Command User Data Erase option
• Prefetch activate/deactivate logic enhancement
• Misc. sightings closure and improvement on product health.
This firmware version contains fixes for the following issues:
• Fix for drive entering disable logical mode after frequent, repeated
O/S reboots
• Fix for sequential read performance decay
• Fix for formatting 4k+DIF causing read errors when using Intel
SPDK
There is a firmware update available for the Intel® SSD 540s, E 5400s
Series and the Intel® SSD DC S3100 Series products. This release of the
Intel® SSD Toolbox will detect if user’s drive is eligible for the firmware
update and directs them to use the Intel® SSD Firmware Update Tool.
For the Intel® SSD 540s Series, the latest firmware revision is 036C.
For the Intel® SSD E 5400s Series, the latest firmware revision
is 036E.
For the Intel® SSD DC S3100 Series, the latest firmware revision
is 036D.
This firmware release provides the following changes:
• (Specific to the Pro 5400s only) Fixes drive issues occurring when
using WinMagic* software with drive Opal security
• Fixes issue that BSOD occurs during S3/S4 resume on systems
supporting devsleep
• Mitigates a security vulnerability which in some cases resulted in
corruption of user’s data (see Intel Security Advisory INTEL-SA00055)

This release includes the latest version of the Intel Update Manager,
v3.4.1942, in the installation.
This release includes the following tool fixes and updates
• Fixed download center and check for updates links.
• Fixed issue where tool stops working on Windows* 10 with Marvel
RAID drive.
• Fixed command line crash when using –identify_device
filename.bin on NVMe drives
• Updated product detection

для кингстона пойдет ?? Или другое по нужно ??

This release of the Intel® SSD Toolbox updates the signing
certificate to a new SHA256 certificate.
This will fix issues where the tool was being reported as
“invalid” at download.