USB Device Tree Viewer 3.8.4 + x64

Исправлено: некоторые мелкие исправления

Написано USB Device Tree Viewer 3.8.3 бесплатно (x86 + x64). Но в архиве только версия х64, где х86 ?

Стандартный Windows (диспетчер устройств) лучше гораздо...

Bugfix: Since V3.7.7 no more new devices where detected after removing a hub until a full refresh
New: Billboard Capability Descriptor decoded

Исправлено: запуск Regedit в основном не работал

New: Context menu item "Regedit..." to open certain device specific registry keys in the Windows Registry Editor
Rewind: Reporting a USB version of 2.0 is no more blamed as an error if the device does not deliver an "other_speed" device_qualifier descriptor because the document 2002_05_28_errata.pdf says:
"Full speed and low speed only devices designed to this specification should also use version number 2.0"
even main USB 2.0 spec says in 9.2.6.6:
"Devices that are high-speed capable must set the version number in the bcdUSB field of their descriptors to 0200H. This indicates that such devices support the other_speed requests defined by USB 2.0.". But Full Speed devices do not support the other_speed requests since the have no other speed...

Bugfix: V3.7.7 did no show a Window when started under XP thru the Windows Explorer
Bugfix: V3.7.7 crashed when a hub did not deliver its USB_HUB_INFORMATION

Workaround: Some ASMedia host controllers fail to deliver their root-hub's symlink by means of IOCTL_USB_GET_ROOT_HUB_NAME. Same problem when requesting the symlink of a standard hub (IOCTL_USB_GET_NODE_CONNECTION_NAME). Both calls may fail with ERROR_NOT_SUPPORTED when the ASMedia drivers asmtxhci.sys and asmthub3.sys are used. Both cases are resolved now by devices' parent-child relation.
New: For /R and /X a 'magic' file name of "stdout" makes it write the text- or XML-report to stdout instead of an actual file. If not redirected it attaches to parent process' console or creates a new one.

Bugfix: wChannelConfig of Audio 1.0 descriptors decoded wrong, possible crash
Bugfix: Other Speed Configuration Descriptor not shown since V3.4

Русская https://www.upload.ee/files/13554223/UsbTreeView-3.7.5_RUS_x64.rar.html
немного не до переведено
скрин

Исправление: устройства USB 3.2 Gen2, работающие со скоростью 20 ГБит/с, отображались как 10 ГБит/с.
Исправление: x64 версия не сохраняла настройки при отсутствии доступа на запись к INI-файлу, поскольку Windows выполняет перенаправление VirtualStore только для 32-битных приложений. Без доступа на запись INI теперь сохраняется в %ALLUSERSPROFILE%\Uwe Sieber (в Windows 2000, XP и 2003 в %APPDATA%).

Исправление: Опция "Read Msft String Descriptor 0xEE" инвертировано считывалась из INI начиная с версии 3.4.0, поэтому при каждом запуске она переключалась между включением и выключением
Исправление: bInterval дескрипторов конечных точек декодировался неправильно
Новое: Выпадающие списки шириной с самый длинный элемент

Bugfix: Option "Read Msft String Descriptor 0xEE" was read inverted from INI since V3.4.0, so it switched between on and off everey start
Bugfix: bInterval of endpoint descriptors decoded wrong
New: Drop-down lists as wide as the longest item

New: Some fine-tuning for smart node naming

Bugfix: When renaming a USB dev's node the default name was always the device description from the Device Manager, even another source was selected

Bugfix: V3.7.0 had no valid default for the new source of display names resulting in showing device IDs until a valid source was selected

New: Tree nodes of USB devices can show now either names from the Device Manager (as USBview and UsbTreeView before V3.7) or names build from USB string descriptors or (new default) a smart choice of the available strings
Bugfix: V3.6.0 reported an error for a trailing NULL character in string descriptors even there is none

New: Support for high-DPI screens - no more bitmap scaling under Windows 8 and 10

Bugfix: Wrong font color when highlighting selected node while not focused

Bugfix: Port maximum speed shown wrong on pre-Win8 systems
Bugfix: Comboboxes with old content after loading an XML report

Bugfix: Minor fixes

New: Highlight for companion ports (Win8+)
New: Right-click -> Copy Tree from here can copy a full treeview screenshot
New: Shows a summary with the most interesting information
New: Can shows sum of used endpoints of all devices attached to a root-hub in the tree-view
New: Remembers which ports have ever operated at SuperSpeedPlus (because so far there is no way to request the capability)
New: UVC 1.5 H.264 descriptors are decoded
New: More device interface GUIDs are resolved
New: Reporting a USB version of 2.0 is blamed as an error if the device does not deliver an "other_speed" device_qualifier descriptor

Bugfix: since V3.4.0 copy tree to clipboard did not work
Bugfix: since V3.4.1 possible crash when restarting a hub

Bugfix: since V3.4.1 SuperSpeed ports got no 'S' icon and max speed shown as SuperSpeedPlus

Bugfix: V3.4.1 crashed on pre-Win8 systems