WinHex 21.8 + Repack + Portable

Перед вами новенькая версия очень известной программы, а именно универсального HEX ( шестнадцатеричная система счисления ) редактора. После распаковки архива и запуски приложения вы сможете совершенно работать с любыми жесткими дисками и дискетами, архивами формата ZIP, различными флеш картами, приводами и разными другими носителями информации, могу только посоветовать скачать WinHex с нашего проекта, знающие люди я думаю сразу разберутся ка пользоваться программой.

Софт знает что такое FAT12/16/32, NTFS, CDFS. Может получать моментально доступ к в виртуальной памяти, работать с RAM умеет на сто процентов и делает это отлично. Можно удалять файлы без восстановления, можно клонировать диск и прочее такое.

Скачать WinHex бесплатно + ключ для активации и crack для регистрации полной версии позволит вам насладиться всеми функциями редактора, плюс вас ждет приятный интерфейс, файлы добавлять можно простым их переносом в главное окно с помощью мышки, нет правда Русского интерфейса, но все это мелочи жизни. Обратите внимания, что версия портативная, значит вы сможете переносить ее с собой на любом носителе, это конечно удобно, также софт стоит отнести к разряду маленьких утилит с большой функциональностью, надеюсь разработка буде вам полезна.

Особенности программы:

Есть портативная версия
Может быть запущена с любого носителя
Самый надёжный метод исследования файла
Максимально быстрая работы
Минимум нагрузки на процессор и оперативную память
Поддержка Windows XP и выше
Приятный интерфейс

Лицензия: ShareWare (после активации программы через кряк, запуск ключа регистрации не требует)
Язык: Multi + Русский
Скачать X-Ways WinHex 19.6 SR-6 + crack бесплатно / 20.8 SR4 Portable Жека + активация / 19.8 SR-8 + 19.9 - версия от Specialist / 21.8 + ключ активации вшит

+160

26-05-2026, 20:42

Если возникли вопросы, читать внимательно:

Группа: Журналист

Регистрация: 15.05.2018

Звание: Свой человек

Написал: Rediska

Я установил пароль на данный архив: rsload

Не знаете, как установить/распаковать/скачать? Антивирус пугает угрозами? Что такое репак — читайте тут.

Читайте также по теме:

Обсуждение программы и отзывы пользователей:

Комментарии (350)

Группа: Администраторы

Комментариев: 294 018

Регистрация: 30.09.2009

Звание:
Написал: RuFull (31 марта 2018 16:20) Сообщение #228

0
19.6
File Type Support
A new directory browser column is now available in X-Ways Forensics and X-Ways Investigator and populated during metadata extraction: Device type. This column shows the class of device that produced a given JPEG file, such as a smartphone's main camera, a smartphone's front/secondary camera, a point and shoot/compact camera, camcorder, DSLR, webcam etc. That information is derived from the generator signature. This column also comes with a filter. Filtering for the device type could be useful for example if you are looking for rather private photos (selfies taken with a smartphone's front camera) or rather professional photos (e.g. DSLR or digital camera back).
Scanned pictures used to be identified as such through report table associations. That is no longer the case. That they were generated by a scanner can now be seen in the new aforementioned column.
Pictures that were identified as screenshots are now shown with "screen" as the device type. The device type "screen" identifies screenshots and sometimes pictures that seem to be specially sized to match a certain screen resolution (e.g. wallpapers).
The GPS processing mode, if available, is listed in Details mode. This mode allows to estimate the reliability/precision of the coordinates. It is used by various manufacturers, and it can be one of the following values: Unknown, GPS, Network, Hybrid, Fused, or CELLID.
New entry named "Geolocation" in the extracted metadata and in Details mode, with the GPS coordinates in a notation as accepted by Google Maps, OpenStreetMap or Bing Maps. It also replaces the previous fields Latitude and Longitude in the extracted metadata as it is more suitable for automatic processing.
Three additional fields for Exif GPS data are output in Details mode where available: Altitude, Image direction, and GPS Error. Altitude might be helpful to judge the reliability of the geo coordinates. Image direction is a feature of high-end smartphones.
If there is something unusual about the presence of GPS coordinates in JPEG pictures, those GPS coordinates are now highlighted in blue color. For example if the GPS coordinates are present and a GPS timestamp is absent, for a mobile device type that is known to always include both at the same time (sometimes depending on whether the front or back camera is used), or for a camera type that is known to not have GPS, it could mean that the coordinates have been retroactively embedded. GPS timestamps that are different from the time when the photo was taken are also highlighted in blue color.
A new file named PhoneAliasTable.txt contains a translation from internal device designations to human-readable marketing names. In particular device designations used by Samsung, Motorola, LG and Huawei are rather cryptic and better understood if translated. This table can also contain the device's release date and region. That table is currently relatively sparsely populated, but its format is explained in the header so that users can help to complete it.
Details mode now shows firmware date and region for JPEG files created by many Samsung mobile phones, which can help to validate other metadata.
The table for the generator signature based Exif data validation now supports more than 11,000 devices (where the front cameras of smartphones count as separate devices).
Time zone extracted from files that were produced by some new Sony devices.
Twitter timestamps in JPEG files are recognized and output in the "Content created" column.
Extraction of Content created timestamp from JPEG files improved.
Automatic removal of interspersed padding data between two thumbnails in JPEG files created by various digital camera models, which was previously included in (prepended to) the second thumbnail's data.
PNG files now also receive a generator signature as part of metadata extraction, to identify PNG files that likely originate from the same source and PNG files that are screenshots.
Detection of the generating device type for some PNG files, also shown in the new Device type column.
Improved detection of PNG screenshots of old mobile phones.
Support for iOS netusage.sqlite files, which record the data usage of apps. Besides the amount of data flowing in and out, they also provides approximate timestamps when apps were used for the first and last times. Appropriate events are extracted and an HTML preview is created containing all relevant information.
Improved stability when processing EVTX files.
Supports a new format variant of certain registry values in Windows 10.
Picture Display
If pictures in Preview mode are shown by the internal graphics viewing library, not the separate viewer component, they can now be rotated in 90° steps by clicking the left mouse button (to rotate to the left) and the right mouse button (to rotate to the right).
Photos taken by mobile phones and digital cameras of certain major manufacturers in portrait mode are stored in landscape orientation and marked as to be rotated left or right in the Exif metadata. Both Preview mode and the View command now adjust those photos to the correct orientation automatically, only with the internal graphics viewing library, not the viewer component. The gallery also automatically adjusts the orientation (not for auxiliary thumbnails).
Clicking the middle mouse button in Preview mode when a picture is shown by the internal graphics viewing library will mirror the picture (flip horizontally) or if the Shift key is pressed flip the picture vertically. Please note that this operation is applied in addition to any active rotation.
The currently active rotation and flip mode are described by some symbols in the upper right corner. Additionally, if no flipping has taken place, but a rotation, the letters "BR" indicate what in the original graphical data was the bottom right corner.
Ability to display certain rare PNG files with invalid zlib compression.
User Interface
Video files, audio files, Office documents and plain text files can now optionally be represented by special icons, just as previously only picture files. You can enable special icons separately for each such category in the directory browser options dialog window.
Many additional icons in the user interface, in particular for the mode buttons and external programs.
Closed envelope icons now reflect the known unread status of e-mails.
Right-clicking anywhere in the Mode button bar outside of all the buttons will now show or hide the divider line between the directory browser and the lower half of a data window. If the divider line is visible, it is thicker now with high DPI settings to make it easier to grab that line and adjust the height of the directory browser. If the divider line is invisible, you can adjust the window height by left-clicking in the Mode button bar and moving the mouse cursor up and down while holding the mouse button. Without the divider it is also more intuitive that the right-hand side of the Mode button bar acts as a status bar of the directory browser and that the buttons in the right half affect the upper half of a data window.
Improved support for high DPI settings in general.
The height of the directory browser options dialog window is now automatically increased as the vertical resolution of the main screen allows in order to accommodate as many column labels as possible and ideally do away with the scrollbar if no longer required.
Russian translation of the user interface updated.
Option to get prompted for each file when printing with direct child objects.
Option to output only non-blank fields on the print cover page.
Performance
Ability to populate the gallery with thumbnails using multiple threads. This makes the biggest difference for high-resolution JPEG pictures whose embedded thumbnails have not been uncovered yet (e.g. during preview of a live machine) or are not used as auxiliary thumbnails, for which the decompression procedure is computationally intensive.
Accelerated volume snapshot finalization for large snapshots with many directories in "Path unknown".
Ability to refine volume snapshots on storage devices with sector wise access using multiple threads just like on images and in directories.
Ability to open large .e01 evidence files faster after the first time, by keeping some internal image metadata for navigation in a separate file. This can make a big difference if the image is stored on media with slow access, in particular remote network drives. Can be turned off in Options | Security, as that is where all the .e01 options are located. If fully checked, the separate file is stored in the same directory as the image itself, so that even other cases / other users that open the same copy of the same image benefit from the increased performance if the separate file has been created before. If half checked, the separate file is stored in the evidence object's internal metadata directory of the current case.

In an attempt to protect their image files from accidental alteration, deletion, or corruption and to maximize the revenue of hardware write blocker manufacturers, a few of our users do not only write block suspect storage devices, but also their own storage devices if those devices contain image files. Those users are well advised to half-check this option for obvious reasons, and here is a friendly reminder that write blocking interferes with proper functioning of the operating system and application programs because it untruthfully signals write success when actually no data is written, preventing the OS and application programs from realizing that the data that they wanted to write could not be written. Write blocking is meant for special situations only. The recommended method to protect one's own data (e.g. images in the case of a computer forensic examiner) would be official write protection that the OS is aware of or enforces itself, not sneaky write blocking. (And backups are good, too, of course.)
Storage Device Management
The list of logical volumes in Tools | Open Disk can now optionally include volumes that are active in Windows, but not currently associated with any drive letter. Please understand that whenever you open volumes, whether with drive letter or without drive letter, no volume slack is presented. Volume slack is included only if you open the physical storage device first and then the partition that contains the volume.
Active volumes that are not ordinary volumes are displayed with a special icon and a special description, e.g. "TrueCryptVolumeX". Useful so that on a live system that you wish to preview, examine or acquire you can quickly see which volumes may need to be addressed separately (in additional to physical storage devices) because it would be difficult to reconstruct or unlock them later based on the data on the physical storage device.
If volumes without connected drive letter are listed, that also includes volumes that have been mounted within Windows as a junction point in another volume. Such volumes are listed with a special link icon, and the junction point is displayed between volume label and volume size.
The list of volumes that do not have drive letters may also include volumes that were previously active in Windows. Those are marked with a crossed out red circle icon. For example a previously mounted TrueCrypt volume that was dismounted might be shown in this fashion. Such volumes cannot be opened any more, they are just listed for informational purposes, which is useful when running X-Ways Forensics on a live system that needs to be examined.
A new command in the Specialist menu allows to write-protect locally attached physical storage devices (including removable media, except optical media) with all their volumes everywhere in the operating system, in all applications, even at the sector level in WinHex itself, no matter which edit mode is active. This can be useful to protect original disks that need to be acquired or analyzed (but only after Windows has detected and accessed them) and your own disks that contain images, from accidental alteration, deletion, or data corruption. The effect will last until you remove the write protection again or unplug the devices or reboot your computer. To keep Windows from touching newly attached physical storage devices before you can write-protect them (i.e. to keep them in "offline" mode first), you would need to disable automatic mounting in Windows (and verify that this works). Turning on write-protection for an offline disk will automatically bring the disk online, at the same time while rendering it read-only. Careful, do not write-protect disks that your Windows system needs to write to for proper functioning.
This new command also allows to selectively write-protect only specific volumes (if mounted as drive letters), not the entire physical storage device. Please note that the read-only status of a volume cannot be lifted selectively if the entire underlying physical storage device is read only.
If a physical storage device is treated as offline or read-only in Windows Disk Management, that information is now displayed in all disk selection dialog windows. Offline disks can be opened for reading/imaging/analysis.
Better support for Linux MD RAIDs with container partitions on GPT-partitioned disks.
File System Support
Referrer URLs in Zone.Identifier alternate data streams are now presented in the Metadata column if such ADS are not included in the volume snapshot.
Support for 1 KB FILE records in NTFS volumes with a sector size of 4 KB.
Rejects more invalid/corrupt FAT directory entries than before.
Fixed occasional absence of exFAT allocation information for file allocation table entries in the Info pane.
Unix style symlinks now have a file icon with a little arrow for easier identification.
Reparse points/junction points in NTFS file systems now have a directory icon with a little arrow to identify them as special directories in the directory browser. Such directories are no longer initially marked as "already viewed" in a newly taken volume snapshot.
Miscellaneous
Support for 5-digit filename extensions in segmented raw images.
More stable when dealing with corrupt .e01 evidence files.
Passing on internal file metadata in evidence file containers is now a 3-state check box. If half checked, only extracted senders and recipients of e-mails will be passed on and not general metadata as known from the Metadata column.
The command line parameter “RVS” now includes a screenshot of the volume snapshot refinement dialog in the case activity log showing the active refinement settings. That screenshot is either textual or graphical in nature depending on your case activity log settings.
If "Page break after x table rows for printing" is selected for the case report, that will now also insert a page break after each report table.
The size of an evidence object that is a directory is now the total recursive size of all its files, not the total capacity of the volume on which it resides. That size is now also shown in the Info Pane as "used space", though the "free space" and "total capacity" are still those of the host volume.
The weight of the device type for the generic relevance judgement can now be defined in the file Generator Signatures.txt. The weight factor can be found at the end of the *** line. It may be between 0 and 50.
The number of categories per device type in Generator Signatures.txt has increased, and there is a new category "Unknown".
Ability to schedule a shutdown or (if supported) hibernation of the machine after a certain number of minutes, in Options | Security. Guaranteed to work only if nothing keeps the machine from powering down, e.g. other application programs with unsaved work etc. If you half-check to proceed "brutally", that should power down the machine even if an application is hung. If fully checked, that will not even wait for other applications that prompt the user what to do with any unsaved work longer than a few seconds. If you exit the instance of WinHex/X-Ways Forensics in which you have scheduled the shutdown, the shutdown won't happen. It is possible to cancel a previously scheduled shutdown without restarting the program.
Some stability improvements.
Many minor improvements.
User manual and program help updated for v19.6.

Очень приятно, Царь!
Группа: Ветеран

Комментариев: 3 212

Регистрация: 15.09.2013

Звание:
Написал: Totemtealt (31 марта 2018 08:44) Сообщение #227

1

Если понадобится X-Ways WinHex 19.6 (уровня Specialist),можно забрать здесь - fayloobmennik.cloud
Или здесь - my-files.ru
Вид после запуска - images.vfl.ru
Группа: Downloader

Комментариев: 225

Регистрация: 16.11.2012

Звание:
Написал: чОткий (10 августа 2017 13:03) Сообщение #226

0

Цитата: Гость Сергей
Ко подскажет как ее русифицировать? Где в настройках найти изменить язык?

Издеваетесь? В комментарии ниже всё разжёвано.
Группа: Гости

Комментариев: 0

Регистрация: --

Звание:
Написал: Гость Сергей (8 августа 2017 21:16) Сообщение #225

0

Ко подскажет как ее русифицировать? Где в настройках найти изменить язык?
Группа: Администраторы

Комментариев: 294 018

Регистрация: 30.09.2009

Звание:
Написал: RuFull (8 августа 2017 14:58) Сообщение #224

0

SR-4:

* Ability to open Linux block devices with Tools | Open Disk under Wine. Internally this requires interpretation of the files as disks, just like with raw image files, and thus works only in WinHex with a specialist license, WinHex Lab Edition, X-Ways Investigator and X-Ways Forensics. The device storage capacity is determined automatically, the sector size not necessarily.

* Creating report table associations based on matching hash sets did not work on multiple files in v19.3 if no second hash database existed. That was fixed.

* Fixed an exception error that could occur when processing TAR archives.

* The investigator.ini file had no effect in X-Ways Investigator v19.2 and v19.3. That was fixed.

* Improved stability when handling certain picture files.

* Improved ability to display GIF pictures with special header extensions.

* Prevented a handle leak in message boxes resulting from an error in Windows API functions that deal with icons.

* Some minor improvements.

Очень приятно, Царь!
Группа: Новичок

Комментариев: 1

Регистрация: 26.09.2016

Звание:
Написал: DocentPro (21 июня 2017 13:39) Сообщение #223

1

Почему Вы пишете "нет правда Русского интерфейса"?
Help-Setup-Russian, please
И пользуйтесь!
Чтобы возвратить английский, необходимо удалить файл
WinHex.cfg из папки программы.
Группа: Активист

Комментариев: 220

Регистрация: 1.12.2012

Звание:
Написал: jao (18 июня 2017 16:03) Сообщение #222

0

Версию хоть проверили?) Этот же автор ранее выкладывал сборку, где было написано, лицензия активна, а редактирование файла было как и раньше заблокировано ..

Добавлено - версия сломана отлично, на файлах нет ВМПрота, редактирование и всё остальное, сохранение работает =) Спасибо
Группа: Администраторы

Комментариев: 294 018

Регистрация: 30.09.2009

Звание:
Написал: RuFull (18 июня 2017 07:45) Сообщение #221

0

19.3
"The whole words only option of the Simultaneous Search works with a user-defined alphabet of characters of which words are composed, in order to identify what a word is and where its boundaries are. In previous versions, only an alphabet of characters from the Latin 1 code page was supported (for all Western European languages). Now an additional alphabet can be defined for letters of certain other languages. If activated, it is used for searches in UTF-16 and searches in regional ANSI/OEM/IBM/ISO/Mac code pages with only 1 byte character such as for Cyrillic, Greek, Turkish, Arabic, Hebrew, Vietnamese, and various Central/Eastern/South Eastern European languages. The Cyrillic alphabet is predefined. "

Очень приятно, Царь!
Группа: Заглянувший

Комментариев: 6

Регистрация: 28.11.2014

Звание:
Написал: PASAf (8 июня 2017 04:26) Сообщение #220

0

19.2 portable вылетает при поиске строк. 18.8 - ищет нормально.
Группа: Заглянувший

Комментариев: 13

Регистрация: 31.12.2012

Звание:
Написал: aaalekseyyy (10 мая 2017 03:23) Сообщение #219

3

На скорую руку быстренько за 5 минут перепаковал Portable в Repack, потому что для меня так удобней:
https://yadi.sk/d/LCYrxsxz3Hva4D:
1. Распаковал и запустил Portable версию.
2. Скопировал лицензию.
3. Скопировал из Portable версии папку в другое место.
4. Запустил программу из папки WinHex и зарегистрировал реанее скопированной лицензией.
5. Скачал программу с офф. сайта.
6. Вытащил оттуда файл setup.exe.
7. Поместил его в папку WinHex.
8. Все. Теперь запускаем, как и раньше, setup.exe и устанавливаем программу. Она устанавливается полностью зарегистрированной.
9. Достаем ярлык на Рабочий стол.

P.S. Для корректной работы программы необходимо в свойствах ярлыка или файла указать запуск от имени Администратора.
Еще, если кто не знает, русский язык устанавливается: Help -> Setup -> Russian, please!

Если модераторы добавят мой Repack в тему, то это было бы очень хорошо.
1. Группа: Заглянувший
  
  Комментариев: 13
  
  Регистрация: 31.12.2012
  
  Звание:
  Написал: aaalekseyyy (10 мая 2017 05:29) Сообщение #218
  
  0
  
  Наверное я не прав. Что-то моя поделка начала сбрасывать регистрацию !!!!!
Группа: Администраторы

Комментариев: 294 018

Регистрация: 30.09.2009

Звание:
Написал: RuFull (28 марта 2017 08:06) Сообщение #217

1

19.2

* The case directory is the directory that has the same name as the .xfc case filename just without the extension. It is a subdirectory of the cases directory. There is now special support for the case directory as an image storage location. If images are moved to the case directory first and then added to the case or if the path of an existing image in the case is changed to that in the case directory with the "Replace with New Image" command, these images will be referenced internally without path, and thus the image can always be found instantly even if the case is moved to a different directory or if the drive letter changes. A case that has all images in its own directory can be considered fully self-contained. References to images in the case directory without path are understood by v19.0 SR-14, v19.1 SR-7, and v19.2.

* More metadata presented for JPEG files in Details mode.

* Changing the display time zone for an evidence object that is a partitioned, physical disk now automatically also changes the display time zone for all its partitions (dependent evidence objects).

* GPT partition names are now shown in the Name column as alternative names and should be helpful when examining Android phone images containing large numbers of partitions, revealing their respective functions.

* Indexing is now permitted as a sub-operation of a volume snapshot refinement run with multiple threads, though it is not further parallelized itself when multiple refinement threads are active.

* Updated file mask for uncovering embedded data.

* In replace mode for report table associations, the currently associated report tables are now automatically preselected, so that it's less work and less error-prone to remove or add one report table specifically.

* User manual and program help updated for v19.2.

Очень приятно, Царь!
Группа: Гости

Комментариев: 0

Регистрация: --

Звание:
Написал: Chax (11 марта 2017 00:25) Сообщение #216

0

Addhaloka, благодарю за подсказки в комментариях про рабочие ключи и за 18.4 x64. Отдельное спасибо RuFull, вот без кого бы Нам перекрыли кислород.
Группа: Заглянувший

Комментариев: 5

Регистрация: 25.03.2012

Звание:
Написал: wajim (10 марта 2017 20:05) Сообщение #215

0

Цитата: ADMIN_CRACK
Это не X-Ways WinHex, это X-Ways Forensics.

Ага, которая по определению не умеет редактировать данные.
Группа: Активист

Комментариев: 68

Регистрация: 24.11.2009

Звание:
Написал: ADMIN_CRACK (10 марта 2017 03:36) Сообщение #214

0

X-Ways WinHex 19.1 SR5

Это не X-Ways WinHex, это X-Ways Forensics.
Группа: Администраторы

Комментариев: 294 018

Регистрация: 30.09.2009

Звание:
Написал: RuFull (9 марта 2017 23:55) Сообщение #213

0

Добавлена версия 19.1 SR5

Очень приятно, Царь!
Группа: Ветеран

Комментариев: 3 212

Регистрация: 15.09.2013

Звание:
Написал: Totemtealt (31 января 2017 14:22) Сообщение #212

0

Да ну,KESS10 - дал добро,HitmanPro - "почесал репу" дал добро:
My Webpage
Вид после установки на "аглицком":
My Webpage
Профиль на Русском:
My Webpage
Самцовость при нэте - не слетает,буду изучать дальше...
Группа: Администраторы

Комментариев: 294 018

Регистрация: 30.09.2009

Звание:
Написал: RuFull (31 января 2017 11:10) Сообщение #211

2

Добавлена версия 19.1 SR1

Очень приятно, Царь!
Группа: Гости

Комментариев: 0

Регистрация: --

Звание:
Написал: Джо (18 января 2017 18:36) Сообщение #210

0

Под виртуальной машиной Virtual PC, эта версия не запускается.
Группа: Новичок

Комментариев: 3

Регистрация: 14.03.2014

Звание:
Написал: vrozborsky (14 января 2017 13:35) Сообщение #209

0

"X-Ways WinHex 19.0 SR6" - исполняемые файлы зашифрованы виртуальными инструкциями, поэтому затруднительно проверить их безопасность, хоть автор взлома защиты лицензии и представляет уважаемую команду, но шифровать таким образом HEX-редактор это перебор.
Группа: Душа компании

Комментариев: 956

Регистрация: 11.03.2013

Звание:
Написал: addhaloka (14 января 2017 02:16) Сообщение #208

4

Цитата: crucia64
Не подскажете, где взять 18.4 x64?

https://www.upload.ee/files/6555175/winhex-x64-addon.zip.html

мои сборки Total Commander (от 31.05.2018)
1. Группа: Душа компании
  
  Комментариев: 719
  
  Регистрация: 8.09.2016
  
  Звание:
  Написал: crucia64 (14 января 2017 02:53) Сообщение #207
  
  0
  
  Большущее человеческое спасибо! Кто будет закачивать, для сохранения настроек запустите ВинХекс из-под Админа.
  
  Мое кредо - всегда. Что бы кто ни говорил, жизнь - очаровательная штука. Главное - понять, с какой стороны надо подойти, чтобы она тебя не лягнула.