ColorControl 9.9.0.0

Missing 'lcms2.dll' error when generating color profile (#305, #306). The debug version has been replaced with a release version.
Error when opening Create Color Profile dialog when no Nvapi is present. The EDID is now only read from registry and if not available, the color primaries will revert to sRGB color space.

General:
Added functionality to create a customizable HDR Color Profile for displays. This can be done via the new "Color Profiles..." button on the Options tab page.
Activate HDR first before clicking this button.
In short words: this allows you to set up a custom gamma (with corrections for SDR), minimum and maximum luminance and other color gamuts (to enable Color Space Conversion).

NVIDIA controller:
moved the "Test dithering" and "NVIDIA info" panels from the Options-tab page to the Settings-button on the NVIDIA controller tab-page
Novideo: fixed issue that when enabling HDR through ColorControl, clamping stayed active and colors were muted because declamping resulted in an error. If you enable HDR now through ColorControl, it will first properly disable clamping before activating HDR.
improved display of current dithering settings when default (auto) dithering is active
added setting Other->Scaling which allows you to set the scaling to GPU or Display as well as no scaling, aspect ratio or full-screen
Game launcher:
Added setting "Apply presets when launching games externally". When this option is enabled, ColorControl will monitor processes and automatically apply the preset whenever a known game is launched (#225)
Note that you must also enable this option per game-preset to let it have effect.
Added the following items to the Options-button of a game preset (you can also use right-click to open the context menu):
NVIDIA Profile Inspector: opens the profile inspector and automatically selects the corresponding game profile (or asks to create one if it does not exist)
Auto apply settings...: lets you configure the mechanism to automatically apply the preset whenever you start the game by other means than ColorControl itself. Contains these settings:
Allow this preset to be automatically executed when the process starts: used in conjunction with the general setting, both must be enabled to allow the preset to be applied automatically.
Optional action to perform directly after the process starts: here you can define what action to execute directly upon game-launch to help apply the preset correctly. The option 'Suspend' is to temporarily suspend the process which may help when switching HDR or other settings.
LG Controller:
added setting "Adaptive Sound Control"
added setting "Virtual Surround" (#257)
General:
added changelog to the Info-tab page (#259)
changed a lot of code under the hood for improved handling of administrator required tasks

General:
Fixed crash on startup when working directory was not the location where the main executable (ColorControl.exe) resides (#224)
LG controller:
Added HDMI signalling override actions for 2020+ models (Other: Colorimetry, MasteringColor, MasteringPeak, MaxCLL and MaxFALL)
Added Reboot action (Misc): reboots the TV. This can be useful when manually turning off the TV starts a compensation cycle and does not actually power off the TV.
Improved UI for AdjustingLuminance and WhiteBalance-actions (2 columns and better labels) (#228)
NVIDIA controller:
Integrated the Novideo sRGB app. Use the Settings-button on the NVIDIA controller tab to access the interface. To apply settings on startup or after dynamic range change (HDR on/off), use the Settings->Settings button and check "Apply Novideo sRGB settings on startup". Via tray icon context menu clamping can also be activated. (#222)

LG controller

Added actions specifically for the 2023 OLED models (C3/G3) to Expert-button and Actions (submenu 'Other'):

4:4:4 Pass Through HDMI1-4/None
QMS-VRR
And a special setting can now be toggled that should enable/disable the full service menu on the C3 and G3 (Expert-button):

Enable Full Service Menu (C3/G3 only): this submenu contains an Enable and Disable item to enable/disable the full (original) service menu. It actually disables/enables the 'simplified service menu' that is now default shown on these models. After enabling this and starting InStart or EzAdjust these service menu's should be fully accessible again.
NOTE: this has not been tested by me (as I do not own one of these tv's) and it goes without saying that this app and its creator are in no way accountable for any damages it may cause to your tv.

General

Restructured the UI controls: every tab page now has its own separate panel which makes future changes a lot easier
You can now disable modules you do not want on the Options-tab page
Every module has its settings on its own tab page, accessible via the Settings-button
Keyboard shortcuts which use the Page Up/Page Down buttons are now possible (eg. Control + PageUp)
Fixed an issue that could cause the automatic update proces to give an error
NVIDIA controller

Added GPU monitoring which shows the current GPU/memory frequency, temperatures, voltage and power
The amount of displayed temperatures depends on the GPU model. RTX 4000 series (and maybe RTX 3000 as well) should show GPU temp/hotspot and memory junction temperatures.
Overclocking information is also shown: type of overclock (offset, curve) and power/voltage percentage
You can change the overclocking settings by first enabling it through the Settings button (check "Enable overclocking")
If overclocking is enabled the "Change OC" button can be used to alter the overclocking settings. Available overclock methods depend on the GPU model. RTX 3000/4000 currently have the most options, including the "Curve" method. This method allows you not only to set an offset frequency, but also set undervolt (UV) parameters. You can limit the maximum frequency or voltage. Currently you can not manually alter each frequency/voltage point. To view the curve you can use MSI Afterburner.
Overclocking settings can also be saved to presets via the "Overclocking" of the preset context menu. When using such presets from the "Game launcher" this will allow you to bind specific overclocking settings to specific games.
NOTE: while all overclocking is done via the official NVIDIA API, you do this at your own risk and this app and creator cannot be held responsible for any damages it may cause.
LG controller

The settings are now available through the Settings button on the "LG controller" tab page and no longer on the Options-tab. Testing power off/on is also accessible through this button.
NOTE: If you have previously configured a shortcut for the "Game Bar", you'll need to reconfigure it again on the new settings dialog.

LG controller:

added Expert-settings "Dolby Precision Detail", "AI Brightness", "AI Genre Selection" and "AI Picture Pro" (2021+ models only)
added Tru-Motion options CinemaClear and Natural
NVIDIA controller:

improved the context menu. Top level items will now be shown in bold if underlying settings have been included. Driver Settings will be bold if there are settings configured that differ from the defaults.
added all driver settings (except SLI). Most driver settings have now been added and can be applied through a preset.
the context menu can now also be used on the "Current settings" presets (per display). You can now directly change settings (like resolution, refresh rate or driver settings) through that menu, without applying a preset.
Game launcher

fixed a bug that LG-presets were not executed from game presets